All Mecanic

Presses with interchangeable cylinders

Logical to use, as all the sets are neatly arranged next to each other, and can be individually placed in the user’s chosen location and shifted randomly.

All cutouts are done at the same height.

Horizontally freely movable cylinders.

Ideal positioning for the cutouts, the cutout is always centrally located under the cylinder. Therefore no torsion, and thus less wear or breakage on knives and dies.

Almost no space limitation, almost unlimited space and
manipulation space for the profiles as well as the user.

Large profiles can be easily manipulated by the user.

It is possible to freely place up to 8 cylinders on the mounting rails provided for that purpose, 1 on each side, and/or arbitrarily up to 8 on the
front of the mounting rail.

One tool set can be mounted per cylinder.

This means up to 8 different cutouts can be done,
without any adjustment.

Tool sets can be exchanged very easily, assembly can only be done flawlessly and is very simple.

The punch sets are universal, and can also be used with the portable ALL MECANIC hand tools.

System can always be expanded, after the initial purchase of the press and cylinders, only tool sets need to be invested in.

For any subsequent changes to profiles that require modifications, only the respective sets should be changed, and not an entire die or unit. The adjustments, and therefore the costs,
are thus kept to a minimum.

Knives and die slats can be changed very quickly, everything is very easy and easily accessible, so that in most cases when broken, the repair can be carried out smoothly by the user.

If knife or die is repaired, any returns should only include the corresponding tool set. So here also low shipping costs, and limited downtime.

Hydropneumatic and equipped with booster. Ready to use. Equipped with:

  • Foot Pedal
  • Pressure regulator, pressure gauge
  • Hydropneumatic booster
  • Quick connectors for quick connection of cylinders
  • Height adjustment, so ideal ergonomic height
  • 3 mounting rails, central, left, right

  • Dim. w x d x h: 780 x 400 x 1100 to 1400 mm. (adjustable), 67kg
  • Each cylinder is equipped with a quick coupler
  • Cylinders sliding on mounting rails
  • Cylinders equipped with quick-mount system for tool sets

 

  • Dim 242 x dia. 93 mm, 4.6 kg

The die sets are for installation on the cylinders equipped with a quick-mount system, for smooth exchange on the cylinder.

No assembly tools are required for mounting the tool sets on the cylinders, nor for mounting the cylinders on the press.

  • Design according to specific customer data

No assembly tools are required for mounting the tool sets on the cylinders, nor for mounting the cylinders on the press.

  • Design according to specific customer data